Thanks, I'll try that next time it happens!I've had this issue myself and it seems to be from stalling. Try reversing and once you hit a high(ish) speed go into drive and see what happens
Thanks, I'll try that next time it happens!I've had this issue myself and it seems to be from stalling. Try reversing and once you hit a high(ish) speed go into drive and see what happens
I've tried it, here's what happened.Thanks, I'll try that next time it happens!
Have you put the files in a folder? Then (for example), it would be Name of folder/Name of file.png (Do be advised, the handrails need to be saved in .dds format)I'm getting a problem because I've made a repaint for the standard (non express) version but the bus is fully white when I try and use it. I've removed the guide layer when saving and the files are all in png format and I have a cti file that has correct file names. Could anyone please help? Much appreciated
Thanks,I have put all the files into a folder but I didn't know that the handrails need to be in .dds,will try thatHave you put the files in a folder? Then (for example), it would be Name of folder/Name of file.png (Do be advised, the handrails need to be saves in .dds format)
I cannot reproduce this bug. No considerable uncontrollable acceleration.
Of note: the engine doesn't actually break, it just stalls with the sudden deceleration/reversing when in gear. It won't restart until you fix it because the electrics are broken, so the starter motor won't run. After you fix the bus, you can restart the engine - but you have to ensure that it's in neutral and the handbrake is applied.
I've tried it, here's what happened.
I was driving along, when I, again, clipped some parked car.
Of course, the bus accelerated again very quickly, I tried shifting gears rapidly, and I think it did kinda slow it down, but not that much, so it went into a house, and got stuck half-inside of it. I've then placed it outside, on the road, and it seemed to be working fine, yet the RPM gauge was going in full circles all the time.
I drove around with it spinning for about half a minute, when it calmed itself down again.
So yeah, you can get around the problem, but only when you haven't got a schedule, as you can't re-place the bus with one.
@UKDT I really enjoy the C400R bus, but I'd really appreciate it if you'd fix the C400RX, so that this doesn't happen. Thank you.
Thank you very much for your detailed explanation.After further testing, I was still unable to reproduce the problem normally, no matter how many parked cars I clipped or punted.
However, I was able to reproduce the problem by reducing the maximum framerate to 10 and crashing into a sign post - analysis of the saved situation showed the engine was spinning at negative 2.4 million rpm, with some billions of torques at the rear wheels.
A further few test crashes with the maximum framerate at 15 or 20 resulted in the rpm gauge going a little negative, but no vast acceleration.
Therefore there are a couple of easy solutions right now:
I've made a couple of tweaks to the engine script that should hopefully reduce/rectify the issue in a future update.
- Drive carefully to avoid crashing, thus minimising the chances of rotating the engine backwards.
- Adjust your settings to try and increase the framerate, which makes the physics much more reliable (and may well make it easier to achieve #1)
The update will probably come with OMSI 2 - Add-On London's release.@Road-hog123
when will the c400r be updated with heating ?
I have no idea what you mean regarding your first point, but as for the second; if you press F2 to get the default passenger view, then use the left and right arrows on your keyboard it will cycle through the different passenger views available.This bus is amazing - dont know if anybody else has this problem but it always spawns zoomed in at certain times and never know how to fix it also if anyone knows how to get general passenger views for any vehicle besides the defaulf one it'd be much appreciated
I agree, the newer E40Ds have a nice look and sound to them, they make a nice younger sister to the 2007 - 2011 models.I think there should be a update like this E400 that First Travel has with some nice wheels and some Cummins ISBE Engine type and the Lights look Beautiful this is what the new update the C400R should have in a couple of Months if you accept it
Isn't that the first gen dash?Oh and also the Cab and the Exterior and the interior need to be updated too.
No that's just a Variant of a E400 Dennis TridentIsn't that the first gen dash?
(used before the one that the C400R is based of)
Isn't that the first gen dash?
(used before the one that the C400R is based of)
Well it is. That’s from the 09 version, when the C400r was based off the 2011 spec. (Iirc)Oh and also the Cab and the Exterior and the interior need to be updated too
No that's just a Variant of a E400 Dennis Trident