Buses Scania Omnicity, CN270UN

Status
Not open for further replies.

BailsBach

Well-Known Member
Aug 1, 2016
138
Hey everyone!
For approximately 2 weeks, Construction Cymru (me and @WelshWizard ) have been collaborating on building the Scania Omnicity bus for OMSI 2, built to the Cardiff Bus (Bws Caerdydd) specification. It's come along quite well, with the base chassis, the dash, 1/8 of the interior, and the seats already finished. Of course, that doesn't mean the bus is soon to be ready, as we still have to place everything together, fix the lighting, complete the back-end of the bus, script and animate, texture and more. Therefore, the bus will be available to download (at maximum) the end of January next year. Of course, we're aiming for this year, but we cannot promise anything as we are also working on the 'Barry' map, and WelshWizard has a separate project of his own. So, without further ado, here are some screenshots!
cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png

cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png
cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png
cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png
The wheel arch is currently incorrect, but WelshWizard plans to revamp it soon. :tongueout:
cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png
cN_TtgcNsV4fbCj-3w40kkWfHiW8UuYW.png

NOTE -
ALL SCREENSHOTS ABOVE ARE OUTDATED WITH NEWER VERSIONS BELOW. PLEASE SCROLL TO VIEW!


We'd love to hear any feedback you have. Thank you. :)
 
Last edited by a moderator:

Mystic Greg

Veteran Member
May 22, 2016
187
Not to put words in Bailsbach mouth, if this goes well I can't see why we can't make the Omnidekka :p and shall re work the dash
 
  • Like
Reactions: BailsBach

BailsBach

Well-Known Member
Aug 1, 2016
138
Will there be an OmniDekka too?
As WelshWizard said, an OmniDekka would be fairly easy to make since we'd already have most of the components finished. :tongueout:
This is nice! however that dash isn't a L serie one its the later K serie scania one
Regards to the dash, I've put the wrong bus 'code' in. The one we are making is not the Scania L94UB, but is in-fact the newer version with the rounded eyes and the Scania symbol only, therefore I believe the dash is correct. But thanks for picking up on it, perhaps you know what the code is for the newer version? :) Thanks for the nice remarks, btw!
 

Road-hog123

An Orange Bus
Administrator
UKDT
Dec 10, 2015
1,796
You could perhaps research mesh smoothing in Blender? Currently you have things shaded flat on curves and it doesn't look the best it could. :)
 
  • Like
Reactions: BailsBach

BailsBach

Well-Known Member
Aug 1, 2016
138
You could perhaps research mesh smoothing in Blender? Currently you have things shaded flat on curves and it doesn't look the best it could. :)
Of course, WelshWizard knows most of the skills needed. We plan to smooth everything down once the chassis itself is complete. The interior will be smoothed and smooth-shaded from the start as they're seperate objects :) Thanks for picking up on it, nevertheless.
 

BailsBach

Well-Known Member
Aug 1, 2016
138
Are you going to make the double decker version of the one you are making at the moment
I've had this question already, but yes, possibly. We're unable to promise anything, but if everything goes to plan and we finish the single decker on time, we could possibly make an OmniDekka (Double Decker). :)
 
  • Like
Reactions: Dianneread58
Status
Not open for further replies.