Invisi Streets, splitting paths??? (1 Viewer)

Hi All
hope everyone is having a cracking day, I need some help or advice folks.
So I have created a terminal similar to the Great Grundorf one, however I have widened the roadways now i need to connect it back up but having to use Invisi streets, but only the top and bottom ends are connecting :( any help truly appreciated folks

Will
 

Attachments

  • 20200530200455_1.jpg
    20200530200455_1.jpg
    398.9 KB · Views: 4
Solution
Amazing work so far - in terms of the terrian, I would turn down the speed and size and just try correcting it carefully. I've never got the hang of terrain, but that's sorted me out a bit before.

Advertisement

If you click on the "Split" button on the right hand pane, under Spline, you should get a blue scissor cylinder when you hover on the spline. Click where you want to split and it should split the big spline into two separate splines. If you need any more help, let me know.

Hi Kyle
Do you know of any wide asphalt splines or objects with no pavements i could use? 10m -14m
 

Yuki7144

Announcement Pack-er
Apr 21, 2017
248
12
219
20
London, United Kingdom
Hi Kyle
Do you know of any wide asphalt splines or objects with no pavements i could use? 10m -14m

You do what Kyle said with the invisi streets spline. After you split it you should be able to use ctrl to clip a new one onto the point where you split it.

If you want wide asphalt splines have a look in the iomexLH as i believe there are one or two 11-15m wide splines with no pavements.
 
  • Like
Reactions: wilberforce1976
Oct 17, 2016
412
29
424
Delete the 2nd part of the split (e.g. the new bit), taking note of the length and/or radius, then place down an invis street spline but hold CTRL. This should then clip to your previous point. Add back in the length and radius to make it contigious again. You should then be able to get another invis street, hold control to clip it to the same point but then change it to fill in the gaps you have in your AI paths.

Hope this helps, but if you still can't get the hang of it I will record a short video.
 

Advertisement

Here are some screens, I managed to get it sorted using the splitting thanks Kyle & Yuki, I keep get terrain coming through, and I keep lowering in but it keeps coming back over any ideas on how to sort this out?, I'm re-doing a whole new GG2 LHD (now named "Perry Valley") the images are of the new Bauernhof terminal now named "Southfield Park" with a proper Coach Terminal joined to the main local bus routes, once I get a few more lines put on I will upload the map for you's to tryout for me

252530_20200602223206_1.png
252530_20200602223243_1.png
252530_20200602223257_1.png
252530_20200602223440_1.png
252530_20200602223738_1.png
252530_20200602223747_1.png
252530_20200602224058_1.png
252530_20200602224118_1.png
252530_20200602224125_1.png
252530_20200602224214_1.png
252530_20200602224312_1.png
252530_20200602230400_1.png
 
This thread is more than 3 years old.

Your message may be considered spam for the following reasons:

Users who are viewing this thread